APRS Settings Transmission Settings Main Frequency [MHz] Speed BW 31.25khz CR 4:5 SF 9 (300bps) BW 31.25khz CR 4:5 SF 7 (1200bps) BW 125khz CR 4:5 SF 12 (default, 300bps) BW 125khz CR 4:6 SF 12 (244bps) BW 125khz CR 4:7 SF 12 (209bps) BW 125khz CR 4:8 SF 12 (183bps) BW 125khz CR 4:8 SF 10 (610bps) BW 125khz CR 4:5 SF 9 (1200bps) BW 125khz CR 4:5 SF 7 (BBS, 6000bps) BW 500khz CR 4:5 SF 7 (BBS, 21000bps) Enable LoRa transmitter TX power [dBm] Automatic CodeRate adaption on TX Add SNR and RSSI to path off To RF during digipeating To KISS To APRSIS To RF and KISS To RF and APRSIS To KISS and APRSIS To RF and KISS and APRSIS SNR/RSSI-encoding on kiss: compatible to APRS-IS? Station Settings Callsign and SSID Relay Path Symbol Table Symbol Show Altitude Show Comment Comment Ratelimit adding comment text Show Battery Telemetry Settings Enable Self Telemetry Self Telemetry Interval [s] Self Telemetry Sequence Numeric MIC Self Telemetry Relay Path Fixed Beaconing Settings Fixed Beacon Fixed Beacon Interval [s] Latitude Preset Longitude Preset Smart Beaconing Settings Min interval [s] Max interval [s] Min speed [km/h] Max speed [km/h] Course change [degrees] Turn Slope [degrees] Turn Time [seconds] GPS enabled Accept own positions via KISS Allow GPS sleep while own positions received via KISS Additional settings for secondary frequency:EXPERIMANTAL - USE WITH CARE! Secondary Frequency [MHz] (for cross-repeating or listening transmissions from igates) TX power on secondary frequency [dBm] Speed on secondary frequency BW 125khz CR 4:7 SF 9 (Fast Standard. default; use high speeds on the secondary frequency) BW 31.25khz CR 4:5 SF 9 (300bps) BW 31.25khz CR 4:5 SF 7 (1200bps) BW 125khz CR 4:5 SF 12 (default, 300bps) BW 125khz CR 4:6 SF 12 (244bps) BW 125khz CR 4:7 SF 12 (209bps) BW 125khz CR 4:8 SF 12 (183bps) BW 125khz CR 4:8 SF 10 (610bps) BW 125khz CR 4:5 SF 7 (BBS, 6000bps) BW 500khz CR 4:5 SF 7 (BBS, 21000bps) RX on frequencies (Only honored, if we are NOT configured as WIDE1 or WIDE2 digi. If set to both frequencies: Ratio depends on how many packets are received on each qrg in a 10min window; we stay 20s on one qrg.) RX on main frequency RX on secondary frequency RX on both frequencies Current RX Frequency: Additional settings for mode repater:EXPERIMANTAL - USE WITH CARE! LoRa Repater Mode off. This device does not do any repeating decision. Repeat if own call is addressed (recommended for normal users). default. Act as WIDE1 (fill-in) digi Act as a simple WIDE2 digi (consider to instead attach a real aprs-digipeater software via KISS) Digipeat heard stations on which frequencies (If LoRa Repeater Mode has not been set to off) Repeat only to main frequency (default) Repeat to both frequencies Repeat only to cross-digi frequency TX beacon or from-kiss on frequencies (Only honored, if we are configured as WIDE1 or WIDE2 digi) TX on main frequency TX on secondary frequency TX on both frequencies APRS-IS settings Enable APRS-IS connection Server Name TCP Port Filter (optional) Callsign (optional) Password (required) Allow traffic from inet to rf Connection status
Device Settings OLED Display enabled Bluetooth enabled LED signaling Auto power off Display show RX time [s] Display timeout [s] Auto power off delay [s]