diff --git a/README.md b/README.md
index 5592459..6dac612 100644
--- a/README.md
+++ b/README.md
@@ -6,28 +6,28 @@ All user settings can be found in TTGO_T-Beam_LoRa_APRS.h
CHANGE CALLSIGN BEFORE UPLOADING FIRMWARE to your T-Beam!!!
You can define two different callsigns and symbols dependend on the transmitted packet.
-"Tcall" is the standard callsign used for traditional APRS packets as used for trackers
-"wxTcall" is the callsign used for APRS packets including a weather report (when DHT22 is used).
+"Tcall" is the standard callsign used for traditional APRS packets as used for trackers
+"wxTcall" is the callsign used for APRS packets including a weather report (when DHT22 is used).
So you can change the SSID and make it easier to differentiate between normal and wahter packets.
-"sTable" should contain the value for the primary or secondary symbol table
-"sSymbol" conatins finally the symbol to be sent with the position report
+"sTable" should contain the value for the primary or secondary symbol table
+"sSymbol" contains finally the symbol to be sent with the position report
-"wxTable" should contain the value for the primary or secondary symbol table used for weather reports
-"wxSymbol" conatins finally the symbol to be sent with the weather report
+"wxTable" should contain the value for the primary or secondary symbol table used for weather reports
+"wxSymbol" contains finally the symbol to be sent with the weather report
-"nextTX" is the transmit intervall in ms (milli seconds) - don't use to short intervalls as it overloads the APRS servers
+"nextTX" is the transmit intervall in ms (milli seconds) - don't use to short intervalls as it overloads the APRS servers
60000L is a could starting point and means a intervall of 60secs or 1 minute.
Usage of the defines:
-#define SEND_WX false => no weather reports are sent
+#define SEND_WX false => no weather reports are sent
#define SEND_WX true => weather reports are sent, but needs a connected DHT22
-#define FIXED_POSITION false
+#define FIXED_POSITION false
// set to true if you want to use fixed position (position defined below) instead, or to false if you want to use GPS data
// also stops sending normal position reports when sending weather reports is active (SEND_WX true)
the following lines are used to define the fixed position
-#define LATITUDE "4813.62N" // please in APRS notation DDMM.mmN or DDMM.mmS used for FIXED_POSITION
-#define LONGITUDE "01539.85E"
+#define LATITUDE "4813.62N" // please in APRS notation DDMM.mmN or DDMM.mmS used for FIXED_POSITION
+#define LONGITUDE "01539.85E"