You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Go to file
US1GHQ 614c67a697
Update image in readme
2 years ago
.github/workflows Actions update 2 years ago
data_embed Add Smart beaconing Thanks SQ9MDD, gorzynsk 2 years ago
img Create H49c4700b02604cf9a3b9f5f1e91c9e33u.webp 2 years ago
include Add Smart beaconing Thanks SQ9MDD, gorzynsk 2 years ago
lib 1200 and 300 baud working fine 2 years ago
pdf Heltec-WiFi-KIT32 & Heltec-WiFi-KIT32_V2 2 years ago
src Fix build 2 years ago
tools BT 2 years ago
.gitignore WiFi support for configuration 2 years ago
.travis.yml LoRa APRS Tracker 5 years ago course calculation corrected 3 years ago Update image in readme 2 years ago
partitions.csv Upgrade firmware from web interface 2 years ago
platformio.ini Update platfromio.ini 2 years ago

LoRa tracker with KISS TNC capability

Tracker can be used on its own. You can also connect it via blueetooth with APRSdroid. After connection with APRX based DIGI it can be used as KISS-TNC



  • Initial work: OE1ACM, OE3CJB
  • Redesigned: SQ9MDD
  • KISS TNC Over Seriall or Bluetooth: SQ5RWU
  • Lora32 board support DJ1AN

Supported boards

  • TTGO T-beam v.0.7
  • TTGO T-beam v.1.0
  • Lora32 board

User key functions:

short press:

  • if there is a GPS-FIX immediate sending of a frame with the position from the GPS
  • if there is no GPS-FIX, immediate sending of the frame with the position saved in the configuration

long press On boot

  • reset to factory default

long press: on or off the GPS power supply

  • if the "FIXED_BEACON_EN" option is enabled in the configuration, a beacon will be sent every set time interval

Oled screens information

  • ((TX)) - position frame sent automatically
  • ((RX)) - informs about the received frame
  • ((GPSOFF)) - GPS power-off information
  • ((GPS ON)) - GPS power-on information
  • ((MAN TX)) - information about sending a manually initialized GPS position frame
  • ((FIX TX)) - information about the forced manual sending of a frame with the position saved in the configuration when GPS is off or no fix
  • ((AUT TX)) - information about sending automatic positioning frame when GPS is turned off
  • ((KISSTX)) - information about sending the frame sent by KISS

How to binary first flash readme... (thanx SP6VWX)

  • Download the appropriate binary file for your board from;
  • Download current version of the esphome-flasher tool
  • Connect your board to your USB port and open ESPHome Flasher.
  • If your board is not showing under Serial Port then you likely need to install the drivers for the CP210X serial chip. In Windows you can check by searching “Device Manager” and ensuring the device is shown under “Ports”.
  • In ESPHome Flasher, refresh the serial ports and select your board's serial port.
  • Browse to the downloaded firmware and select the correct firmware based on the board type.
  • Select/Press Flash ESP.
  • Once complete, “Done! Flashing is complete!” will be shown.
  • any subsequent updates can be done via WWW