You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Łukasz Nidecki c278ab3ec9 Merge branch 'master_sq9mdd' of into master_sq9mdd 1 year ago
.github/workflows Actions update 1 year ago
data_embed RTC time. Received time on rx list 1 year ago
img Create H49c4700b02604cf9a3b9f5f1e91c9e33u.webp 1 year ago
include Put rf95 to sleep when starting update 1 year ago
lib Reformated code 1 year ago
pdf Heltec-WiFi-KIT32 & Heltec-WiFi-KIT32_V2 1 year ago
src Merge branch 'master_sq9mdd' of into master_sq9mdd 1 year ago
tools Include git hash in version 1 year ago
.gitignore WiFi support for configuration 1 year ago
.travis.yml LoRa APRS Tracker 4 years ago course calculation corrected 2 years ago Update 1 year ago
partitions.csv Upgrade firmware from web interface 1 year ago
platformio.ini Use ArduinoJson to encode received packets list 1 year ago

LoRa tracker with KISS TNC capability

Tracker can be used on its own. You can also connect it via blueetooth with APRSdroid. After connection with APRX based DIGI it can be used as KISS-TNC



  • Initial work: OE1ACM, OE3CJB
  • Redesigned: SQ9MDD
  • KISS TNC Over Seriall or Bluetooth: SQ5RWU
  • Lora32 board support DJ1AN

Supported boards

  • TTGO T-beam v.0.7
  • TTGO T-beam v.1.0
  • Lora32 board

User key functions:

short press:

  • if there is a GPS-FIX immediate sending of a frame with the position from the GPS
  • if there is no GPS-FIX, immediate sending of the frame with the position saved in the configuration

long press On boot

  • reset to factory default

long press: on or off the GPS power supply

  • if the "FIXED_BEACON_EN" option is enabled in the configuration, a beacon will be sent every set time interval

Oled screens information

  • ((TX)) - position frame sent automatically
  • ((RX)) - informs about the received frame
  • ((GPSOFF)) - GPS power-off information
  • ((GPS ON)) - GPS power-on information
  • ((MAN TX)) - information about sending a manually initialized GPS position frame
  • ((FIX TX)) - information about the forced manual sending of a frame with the position saved in the configuration when GPS is off or no fix
  • ((AUT TX)) - information about sending automatic positioning frame when GPS is turned off
  • ((KISSTX)) - information about sending the frame sent by KISS

How to binary first flash readme... (thanx SP6VWX)

  • Download the appropriate binary file for your board from;
  • Download current version of the esphome-flasher tool
  • Connect your board to your USB port and open ESPHome Flasher.
  • If your board is not showing under Serial Port then you likely need to install the drivers for the CP210X serial chip. In Windows you can check by searching “Device Manager” and ensuring the device is shown under “Ports”.
  • In ESPHome Flasher, refresh the serial ports and select your board's serial port.
  • Browse to the downloaded firmware and select the correct firmware based on the board type.
  • Select/Press Flash ESP.
  • Once complete, “Done! Flashing is complete!” will be shown.
  • any subsequent updates can be done via WWW